Carriage house
Raised-panel steel
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateFast, Reliable Garage Door Opener Repair Across Union Park
A garage door opener that grinds, reverses, or won’t respond usually means one of three things in Union Park: a motor that has worked past its useful life, sensors knocked out of alignment by afternoon storms, or aging springs forcing the opener to do work it was never designed for. We fix all three, typically in one visit. Our techs know Union Park’s 1980s and 1990s subdivisions well, and we stock the parts on our trucks that these older systems most often need. Call (833) 613-0599 to get a straightforward answer about your opener today.

Why Lighthouse Garage Door Service Is Union Park’s Preferred Garage Door Opener Repair Company
Union Park homeowners tend to ask the same two things when an opener fails: “Can you explain what actually went wrong?” and “Can you fix it without a second trip?” We are built for both. Our techs work across Union Park every week, from the streets off Lake Underhill Road to the neighborhoods around Downey Park. That local repetition means we recognize the failure patterns specific to this area’s housing stock and weather before we even open a panel.
What sets us apart is brand fluency. We are trained and experienced on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That matters when your opener is a 15-year-old Craftsman paired with a door that has outlived its original springs. We do not tell you to rip it all out and start over. We give you clear answers about what to repair now and what can wait. Our Garage Door Opener Repair team handles every call the same way: diagnose honestly, explain the options plainly, and leave the system working properly.
Len Dougherty leads the team with a simple rule: the fix has to hold up to Union Park’s humidity, not just work for a week. That means using sealed-bearing rollers, corrosion-resistant hardware, and high-cycle springs when the job calls for them. Homeowners in Union Park do not want to call back in six months. We design every repair as if we are the ones who have to answer that second call.
Styles & brands we work with






Garage Door Motor Replacement in Union Park
Garage Door Motor Replacement in Union Park is often the right call when your opener runs, but the door barely moves, or the motor sounds like it is grinding itself apart. In older Union Park homes, the original opener motor has frequently spent 15 to 25 years fighting a door that got heavier as hinges corroded and spring tension faded. The motor loses that fight slowly, then suddenly. A replacement motor in Union Park typically runs $250 to $550, including the labor to remove the old unit, install the new motor, and recalibrate travel limits and force settings.
When Replacement Beats Repair
A worn gear or failed capacitor can sometimes be swapped for $120 to $200. But if your opener is a chain-drive unit nearing two decades old, and the motor housing is loud or hot after each cycle, replacement is usually cheaper over two years than nursing it along. We will tell you which side of that line you are on before any work begins.
Heavier-Duty Motors for Union Park’s Older Doors
Some Union Park homes have oversized two-car doors or solid wood doors that a standard residential motor strains against. In those cases we recommend a heavier-duty motor sized for the actual door weight, not just a like-for-like swap. That prevents the premature gear and capacitor failures we see on underpowered openers across Union Park.
Garage Door Opener Installation in Union Park
Garage Door Opener Installation in Union Park covers both replacing a dead opener and upgrading to a modern belt-drive or smart system. A new opener installation in Union Park runs $250 to $550 depending on the drive type, motor power, and whether we are reusing existing rails and sensors. We quote the full installed price before we start, and that is the price you pay.
What the Job Includes
We swap the opener head, check the door balance, set travel limits, and test safety reversal. If the door itself is off balance, we address that before the new opener goes in because a new motor on an unbalanced door will fail early. That is the kind of thing that gets skipped in a bare-bones install and shows up as a service call a year later.
Smart Opener Upgrades
Many Union Park homeowners use a smartphone to run everything else in the house, and the garage should not be the exception. We install belt-drive and smart openers with battery backup so the door still works when a summer storm takes out power. Battery backup is a practical upgrade here, not a luxury.

Trusted Brands We Service in Union Park
We work on the brand you already have. That includes LiftMaster and Chamberlain openers, which dominate Union Park’s building stock, plus Genie, Craftsman, and Raynor units still running in older homes. For doors paired with those openers, we regularly service Clopay, Amarr, and Wayne Dalton panels and hardware. We keep common parts for these brands on our trucks, which keeps most Union Park repairs to a single trip. Clear answers, not upsells.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Opener Repair Problems We See in Union Park Homes
- Opener motors working against dead springs. In Union Park’s 30-plus-year-old homes, torsion springs often lose tension before the opener fails. The motor keeps lifting the door’s full weight, burning out gears and capacitors far earlier than it should.
- Photo-eye sensors misaligned after storms. Frequent summer thunderstorms rattle sensor brackets out of alignment, and humidity corrodes the wiring contacts. The door refuses to close or reverses for no apparent reason.
- Hinges and rollers corroded from humidity. Year-round moisture drives rust on hinges and rollers, increasing friction. The opener strains harder on every cycle, which shortens its life and makes it loud.
- Opener gears stripped from age. The nylon gears inside many older openers simply wear down. A door that starts, jerks, and stops is often a stripped gear, which we can replace without swapping the whole unit.
Pricing for Garage Door Opener Repair in Union Park, FL
A typical garage door opener repair in Union Park runs $120 to $320 depending on what has failed. A sensor realignment or capacitor replacement lands at the lower end. A gear replacement or logic board swap sits in the middle. A full opener motor replacement runs $250 to $550, and a new opener installation is $250 to $550. Here is what to expect, line by line:
| Service | Union Park Price Range |
|---|---|
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Garage Door Motor Replacement | $250 – $550 |
We quote the exact price before any work starts and we do not pad the invoice after the fact. Call (833) 613-0599 for a free estimate on your opener repair in Union Park.
We Also Serve Cities Near Union Park
Our service area covers Union Park and the surrounding east Orange County communities. We handle opener repairs and full installations in Winter Park, Azalea Park, Goldenrod, and Alafaya on the same schedule. If you are just outside Union Park and need a garage door opener fixed, call (833) 613-0599 and we will get you on the route.
Serving Union Park, FL — Our Local Coverage Area
We’re based in the Union Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Opener Repair in Union Park
Humidity in Union Park accelerates rust on hinges and rollers, and that added friction forces your opener to work harder on every single cycle. The strain usually shows up first as a slower, louder door, then as a stripped gear or burned-out capacitor. We fix the friction problem along with the opener so the repair lasts. Call (833) 613-0599 and we will diagnose it properly.
In Union Park, which is unincorporated Orange County territory, permits for garage door work run through Orange County rather than the City of Orlando. For most opener replacements, no permit is needed. If the job expands to structural door replacement, county permitting may apply. We know the Orange County process and will tell you exactly what your job requires before you book.
Photo-eye sensors should be checked every spring, before the summer storm season. Union Park’s near-daily afternoon thunderstorms rattle brackets loose, and humidity corrodes the contacts. A quick visual check for alignment and wiring integrity prevents most sensor-related service calls. If your door is already reversing on its own, call (833) 613-0599 and we will get it sorted.
Yes. Some Union Park homes have oversized two-car doors or solid wood doors that a standard residential opener struggles with. We size the motor to the actual door weight and install a heavier-duty opener that will not burn out prematurely. The price range for a heavier-duty opener installation is the same $250 to $550, depending on the unit.
We repair openers from LiftMaster, Chamberlain, Genie, Craftsman, Raynor, and others. We are not a single-brand dealer, so we recommend the right part for the opener you already own rather than pushing a full replacement. Call (833) 613-0599 for an exact quote on your specific opener.
Written by Len Dougherty, Owner at Lighthouse Garage Door Service, serving Union Park and greater Orlando since the company’s founding.
If your garage door opener is acting up in Union Park, call (833) 613-0599 today. We will give you an honest diagnosis and a free estimate, and we will fix it right the first time.